Type A inspection bodyGAC-IB-0299
The full cycle of construction inspection
We provide technical supervision of construction, inspection of designs and cost estimates, inspection of acts of completed works — Form No. 2 — and surveys of the technical condition of buildings and structures.
Independent quality assessment and cost control — with substantiated conclusions.
- Accreditation certificate
- GAC-IB-0299
- Body type
- Type AIndependent third party
- Standard
- ISO/IEC 17020ISO/IEC · 2012/2013
- Period of validity
- 10.07.2024 — 10.07.2028ILAC-MRA recognition
The basis of trust
Independence is not a declaration —
it is determined by the type of the body
AUDITESCORT is a Type A inspection body. On the facility we inspect, we take no part in design, construction, the supply of materials or operation.
Independence
We are not the designer, construction contractor, supplier or owner of the facility we inspect.
Impartiality
The inspection report is based solely on the results of the inspection and on objective evidence. The assessment is free from the influence of the client’s interests, commercial gain and any other external pressure. We apply uniform principles to every facility we assess and manage the risks of conflict of interest.
Confidentiality
Information obtained during an inspection is not disclosed to third parties, except in the cases established by law.
Important clarification: ISO/IEC 17020 sets out the requirements for the competence, impartiality and consistent operation of an inspection body. Accreditation under this standard is granted to the inspection body, not to a building or structure. It is not a technical safety standard for buildings. The conformity of a specific facility is assessed on the basis of the applicable regulations, construction norms, the approved design and the agreed technical criteria.
Scope of accreditation
The scope of accreditation covers 13 positions. The list and the procedure codes correspond to the annex to certificate GAC-IB-0299 (updated 10.06.2026).
Cost estimate and value
Inspection of the facility cost estimate
Conformity assessment of the cost estimate against the established requirements, average market prices and, where necessary, the design.
Pricing adequacy inspection
Conformity assessment of the cost estimate, including against the resources and capabilities of a specific supplier.
Inspection of completed works — Form No. 2
Conformity assessment of the works performed at the facility against the design and cost-estimate documentation and the acts of concealed works.
Facility
Technical supervision — inspection
We attend the construction, repair, installation, dismantling, reconstruction and restoration works at the facility and assess their conformity with the design and the established requirements.
Facility types · within a single accredited position — TA-IP-04-19
04.1Buildings and structures
Construction, repair, installation, dismantling, reconstruction and restoration works — including the determination of the building’s energy-efficiency conformity.
Bridges and bridge crossings
Inspection of the process of construction, reconstruction and repair works on bridge structures.
Tunnels
Conformity assessment of works on tunnel structures against the design and the established requirements.
Hydraulic structures
Inspection of construction and reconstruction works on hydraulic structures.
Motor roads
Works on motor roads and roads for public use — including geometric and structural requirements.
Aerodromes
Conformity assessment of construction works on aerodrome structures and pavements.
Electrical networks
Installation works on electrical networks and electrical equipment — up to 1000 V and above 1000 V.
Engineering systems
Installation works on water supply, sewerage, heating and ventilation, and low-current systems.
Inspection of the technical condition of a facility
Conformity assessment of the condition of an existing facility or part of it, with measurements and photographic records.
Design and surveys
Structural section of the design
The structural section of buildings and structures, hydraulic structures, bridges, tunnels and motor roads.
Architectural section of the design
Conformity assessment of the architectural section against the applicable documents.
Engineering-geological survey
Conformity assessment of the engineering-geological survey/conclusion of the design.
Engineering-hydrological survey
Determination of the conformity of the engineering-hydrological survey/conclusion with the technical specification.
Engineering networks — power supply
Power supply systems up to 1000 V and above 1000 V, including their technological part.
Engineering networks — low-current systems
Low-current systems and their technological part.
Engineering networks — water and sewerage
Water supply, sewerage, drainage and their technological part.
Engineering networks — heating and ventilation
Ventilation, air conditioning, heating and their technological part.
Inspection at different stages of construction
Stage 01
Before construction begins
Conformity assessment of the design and the cost estimate, and verification of pricing adequacy. Non-conformities are identified before the work begins.
Stage 02
During the works
Inspection of the conformity of the works, verification of quantities and stages, documentation of evidence.
Stage 03
At completion
Final inspection within the agreed scope: the works performed and the corresponding documentation.
The inspection body does not take administrative decisions and does not issue construction permits or commissioning certificates. The result is a documented report which the client uses in dealings with the authorised body.
Legislation
Who is required to have an inspection
This is not our offer — it is established by legislation.
The holder of a construction permit for a class I or II building or structure may commission an inspection from an accredited body — this is their own choice.
The holder of a construction permit for a class III or IV building or structure is obliged to commission an inspection from an accredited inspection body or a certified expert under a contract.
Code of Spatial Planning, Architectural and Construction Activity of Georgia, Article 119. Failure to submit a stage protocol in the established manner constitutes, under Article 123 of the same Code, grounds for commencing administrative proceedings.
Choose a time
Your need — our involvement
Identify defects before they become problems and build the foundation for a reliable result.
- Before construction begins
to verify the design and the budget.
- While the works are in progress
to identify defects before they are covered up.
- before settlement
to verify the quantities performed and their cost.
- Before purchase or handover
to assess the condition of the facility.
- Before reconstruction or when damage is discovered
to plan further action.
Portfolio
Continuous accreditation since 2016
Hundreds of facilities — residential, commercial and engineering structures.
Confidentiality
The confidentiality of information is protected ISO/IEC 17020 in accordance with the requirements of the standard.
Process
How an inspection is carried out
01
Application
You specify the facility, the stage and the need. We ask clarifying questions.
02
Review of documents
We review the documentation, agree the scope and the assessment criteria, and a contract is concluded.
03
Inspection
Inspection by the agreed methods — documentary and on site. We collect evidence.
04
Reporting
What was inspected, by what method, what was found and what limitations apply to the assessment.
Outside the scope of accreditation
Other area
The service indicated below None Inspection and is not carried out within the scope of ISO/IEC 17020 accreditation.
Why it is kept separate
- Accreditation certificate GAC-IB-0299 covers only the areas of construction inspection — valuation is not included in it.
- Valuation is governed by other rules and its result is not an inspection conclusion.
- Before inspection and valuation are provided simultaneously for the same facility, we assess the risk of a conflict of interest; where necessary, the services are separated between different performers.
Valuation
Determination of the value of property and property rights.
- Real property
- Movable property
- Business, shares, interests
- Damage assessment
The valuer’s certification is to be confirmed
Contact
Contact us
For the inspection of your facility — quality begins with the right decision.
Save time — submit your application online.
- Address
- Tbilisi, 14a Alexander
Kazbegi Avenue, 3rd floor - Phone
- +995 599 81 87 87
- [email protected]
- Legal name
- TIAG Auditescort LLC
- Identification code
- 205229439
- Accreditation certificate
- GAC-IB-0299